Oasis Aquashock Oasis Aquashock

Trolley

Log in or Register to start shopping

 

No More Nails Original Cartridge

No More Nails Original Cartridge

365g x 1

Buy a case of 12 of this product and save! »
Product:No More Nails Original
RSP:£6.99
POR:53.82%
Pack Size:300ml
Product Code:207185
VAT Code:Standard
Brand:UniBond
Product Category:Non Food, Paper & Disposables > Non Foods > Gardening & DIY
5010383341619
  • For interior use
  • Solvent free
  • Bonds to most materials
  • 0 sec holds instantly
  • Instant grab
  • High strength
  • Gap filling
  • Flexible
  • Paintable when dry
  • Fully cured in 24 to 48 hours
  • Water clean up

 

Additional Pack Information

Coverage
Approximately 11m using a 6mm bead.

 

Product Marketing

A high strength adhesive that eliminates the need for nails and screws in many DIY and repair jobs. No More Nails Original provides unparalleled support for heavier objects. Safe and easy to use. Excellent grab. Adheres to most building materials. Easy clean up.

Bonds to most materials*
*Suitable for: Wood, ceramic, metal, glass, concrete, brickwork, plaster, stone & most plastics

Additional Information

  • Origin Free Text
  • Pack Type: Dispenser

 

Preparation and Usage

Not suitable for PE, PP or Teflon®

Preparation
Apply to clean, dry surfaces that are free from loose material, dust, oil, grease and polish.
Apply within temperature range of +10°C to +40°C.
When bonding at least one surface must be porous.
Substrates must be strong enough to support weight of items held.
0 sec holds instantly†
†When fixing heavier items, or to uneven surfaces use temporary support until adhesive is dry.

How to Use
1. Cut off the tip of the cartridge above the screw thread, screw on nozzle and cut nozzle to desired size. Insert cartridge in to cartridge gun.
2. Apply adhesive to the item being bonded in continuous beads 15cm apart.
3. Position item with firm pressure and twisting slightly, ensure good contact before releasing pressure.
4. Wipe away excess and clean residues of adhesive with water.
5. Allow 24 - 48 hours for adhesive to dry before subjecting to additional load depending on temperature and substrate.

Safety

Sensible Working Practices
Keep out of the reach of children and animals.

Limitations
Not suitable for water immersion and permanently wet or damp areas. Protect from frost.

 

Manufacturer's Address

Henkel Limited,
Winsford,
Cheshire,
CW7 3QY.

 

 

Recommended for you

 

The image and product information have been prepared for illustration and information purposes only and may differ from that shown. Whilst Bestway/Batleys use reasonable endeavors to ensure that the product information presented is accurate and up to date it does not accept any liability for any information which may not be accurate, it is not a substitute for reading the product packaging or label prior to use. You should note that products and their ingredients are subject to change. If you do require precise ingredients or nutritional information you should consult the manufacturer, whose contact details will appear on the packaging or label. Where there is a link to a third party's website for further information on the product, please note that Bestway/Batleys have no control over and no liability for the contents of that website. Bestway/Batleys accept no liability or responsibility whatsoever for any other web sites which may be accessed through the Bestway/Batleys websites. Bestway and Batleys are reliant upon third parties for much of the information provided and reserve the right to change data, references and product specifications at any time. This data is supplied for personal use only. It may not be reproduced in any way whatsoever without Bestways/Batleys prior consent, nor without due acknowledgement.

Welcome!

×

In order to show you the product range available at your local depot, please enter your postcode:

Just show me the default range »

Existing Customers

Please log in »